EZLink™ 4G

Article# EZLINK-4G

EZLink 4G
EZLink 4G
EZLink 4G
EZLink 4G
EZLink 4G
EZLink 4G

IoT Data-logger.

EZLink™ 4G IoT data-logger is the most cost-effective solution for Smart sensor monitoring. This plug-n-play device can be retrofitted with any MODBUS installation or sensor network to continously capture data for remote analysis and report purposes.


  • Remote monitoring.
  • MODBUS RTU RS485 enabled.
  • 4-20mA Analog Inputs.
  • Industrial grade.
  • Made in India.
  • FTP data recording.
  • Easy configuration.
  • Over-the-Air (OTA) upgrades.

General
Connectivity GSM/GPRS (4G) Quad Band
FDD LTE, TDD LTE, TDSCDMA, WCDMA
CDMA2000 1x/EVDO, GSM (900/1800MHz)
Logging 5 min - 24 hours / reading
Transmission Real-time
Storage 16,000 records
Interface(s) 1 x EIA RS485, 2 x 4-20mA (±1% of FS)
Voltage 5 VDC ±10%
Power 10W (peak)
Protection Surge protection on sensor inputs
Over voltage and reverse polarity protection on Power Input
Clock Internal (Stability 1ppm/yr)
Configuration SMS, Cloud

Analog input(s)
Type 4-20mA inputs
Accuracy 1% of Full Scale
Resolution 12 bits
Input Impedance mA < 100Ω
Environmental
Operating Temperature 0 to 55 ℃
Humidity 0 to 95% RH non-condensing

Physical
Dimensions 45(W) x 75(H) x 46(D) mm
Mounting DIN Rail (35mm)
Weight 100 gms (approx)
Color (RAL) Black (9005)
Material Molded ABS

Status Indication
LEDs Power/RUN/Internet, MODBUS TX/RX

Installation Manual

IM18001, Issue: A, Rev: 1
Dec, 2018

Specification

TS20002, Issue: A, Rev: 0
Dec, 2020

Power Supply

Power Supply
Input: 85 ~ 264VAC
Frequency: 47 ~ 63Hz
Output: 5VDC
Power: 15W

Antenna

Antenna
Type: Magnetic
Frequency: 698~2700/1990MHz
Gain: 3dBi
Cable: RG174 (3m)
Connector: SMA (M) Straight

Enclosure

Enclosure
Type: Junction Box
Material: PC
Color: Grey, RAL 7035
Dimension: 300x150x170mm
Protection: IP66

Surge Protection

Surge Protection Device
Max Power Protection: 600W
Surge Voltage Category: 6KV
Working Voltage: 5 VDC
Protection Lines: 2